In Stock
Share your international phone number to discuss pricing and delivery:
Buy this product in 1 click:
Or contact us directly via:
Skyzone TX2501 CNC 6.2 G / 5.8 G 2.5 W 56-Channel FPV VTX
Product Code: VTXTX2501
All about product
Description
Reviews
0
Questions0
Skyzone TX2501 CNC 6.2 G / 5.8 G 2.5 W 56-Channel FPV VTX
Description
Skyzone TX2501 CNC VTX – built for extreme range & rock-solid video.
The TX2501 combines a rugged CNC-milled shell, active cooling fan and selectable RF
power (25 mW / 800 mW / 1.6 W / 2.5 W) to deliver a clean, low-noise signal on
56 channels spanning 4.99 GHz to 6.18 GHz. MMCX output, LED segment display
and dual Button / IRC Tramp control make channel and power changes quick in
the field.
Key Features
• 56 CH covering A, B, E, F, R, L, X & S bands (4990-6184 MHz)
• Selectable 25 / 800 / 1600 / 2500 mW output – up to ≈3.5 W burst
• Precision-cut CNC heat-sink case with cold-start cooling fan
• Wide 9-26 V input (3-6 S Li-Po) with 5 V out pad
• Button or IRC Tramp protocol for on-screen setup
• LED segment read-out of Band / Channel / Power
• Standard 30.5 × 30.5 mm stack mount (M3)
• Lightweight 27.5 g inc. fan
Channel Map
| Band | CH1 | CH2 | CH3 | CH4 | CH5 | CH6 | CH7 | CH8 |
|---|---|---|---|---|---|---|---|---|
| A | 5865 M | 5845 M | 5825 M | 5805 M | 5785 M | 5765 M | 5745 M | 5725 M |
| B | 5733 M | 5752 M | 5771 M | 5790 M | 5809 M | 5828 M | 5847 M | 5866 M |
| E | 5705 M | 5685 M | 5665 M | 5645 M | 5885 M | 5905 M | 5925 M | 5945 M |
| F (Race) | 5740 M | 5760 M | 5780 M | 5800 M | 5820 M | 5840 M | 5860 M | 5880 M |
| R | 5658 M | 5695 M | 5732 M | 5769 M | 5806 M | 5843 M | 5880 M | 5917 M |
| L (Low) | 5362 M | 5399 M | 5436 M | 5473 M | 5510 M | 5547 M | 5584 M | 5621 M |
| X (5 G) | 4990 M | 5020 M | 5050 M | 5080 M | 5110 M | 5140 M | 5170 M | 5200 M |
| S (6 G) | 6002 M | 6028 M | 6054 M | 6080 M | 6106 M | 6132 M | 6158 M | 6184 M |
Technical Specifications
| Antenna Port | MMCX |
| Power Levels | 25 / 800 / 1600 / 2500 mW (max ≈ 3.5 W) |
| Input Voltage | 9 – 26 V DC |
| 5 V Output | 1 A (for camera / OSD) |
| Control | Button or IRC Tramp (UART) |
| Frequency Steps | 1 MHz (custom) |
| Mounting | 30.5 × 30.5 mm pattern, M3 |
| Dimensions | 38.8 × 38.6 × 22.5 mm |
| Weight | 27.5 g (incl. fan) |
Package Contents
• TX2501 CNC VTX
• 6-pin wiring harness
• MMCX-to-SMA pigtail
• Mounting screws & rubber grommets
Always verify local RF regulations before powering a 5 / 6 GHz transmitter.
High-power modes may require a HAM licence or be restricted in your region.
Reviews
There are no reviews for this product.
There are no reviews for this product, be the first to leave your review.
Answers & questions
Add your question and we will answer as soon as possible.
No questions about this product, be the first and ask your question.