In Stock
Share your international phone number to discuss pricing and delivery:
Buy this product in 1 click:
Or contact us directly via:
Mateksys AP_PERIPH GNSS M10-L4-3100
Brand: Matek
Product Code: M10-L4-3100
All about product
Description
Reviews
0
Questions0
Mateksys AP_PERIPH GNSS M10-L4-3100
Description
1. Product Summary
1.1. Product Description
The Matek M10-L4-3100 is a peripheral navigation module based on the u‑blox MAX-M10S multi-constellation GNSS receiver, integrated with a high-precision industrial compass and barometer. It runs the AP_Periph firmware (for ArduPilot platforms) on an STM32L431RCT6 MCU and supports CAN/DroneCAN and UART/MSP interfaces for seamless integration into UAV systems. :contentReference[oaicite:4]{index=4}
1.2. Key Features
- Multi-constellation GNSS: GPS, Galileo, GLONASS BeiDou (via u-blox MAX-M10S). :contentReference[oaicite:5]{index=5}
- Industrial-grade compass: PNI RM3100 with high resolution, large dynamic range, and no hysteresis. :contentReference[oaicite:7]{index=7}
- Integrated barometer: SPL06-001. :contentReference[oaicite:9]{index=9}
- Interfaces: CAN/DroneCAN (primary), UART2 (MSP protocol) and I2C JST-GH for optional air-speed sensor. :contentReference[oaicite:10]{index=10}
- Input voltage range: 4.5 – 5.3 V (5 V pad) with typical consumption ~60 mA. :contentReference[oaicite:11]{index=11}
- Compact size: 36 × 36 × 12 mm; weight: ~16 g. :contentReference[oaicite:12]{index=12}
- Includes patch GNSS antenna (25 × 25 × 4 mm) pre-installed. :contentReference[oaicite:13]{index=13}
- Discontinued status: End-of-life as of Dec 2024 (replaced by M9N-G4-3100). :contentReference[oaicite:14]{index=14}
2. Technical Specifications
Table 2-1. M10-L4-3100 System Specifications
| Parameter | Specification |
|---|---|
| GNSS Receiver | u-blox MAX-M10S (GPS, Galileo, GLONASS, BeiDou) :contentReference[oaicite:15]{index=15} |
| Compass | PNI RM3100 :contentReference[oaicite:16]{index=16} |
| Barometer | SPL06-001 :contentReference[oaicite:17]{index=17} |
| MCU | STM32L431RCT6 :contentReference[oaicite:18]{index=18} |
| Interfaces | CAN (DroneCAN), UART2 (MSP), I2C (JST-GH) :contentReference[oaicite:19]{index=19} |
| Input Voltage | 4.5 – 5.3 V DC :contentReference[oaicite:20]{index=20} |
| Current Consumption | ~60 mA :contentReference[oaicite:21]{index=21} |
| Operating Temperature | -20 °C … +80 °C :contentReference[oaicite:22]{index=22} |
| Dimensions | 36 × 36 × 12 mm :contentReference[oaicite:23]{index=23} |
| Weight | ~16 g :contentReference[oaicite:24]{index=24} |
| Status | Discontinued (EOL, replaced by M9N-G4-3100) :contentReference[oaicite:25]{index=25} |
3. Applications
- Use in UAVs, multirotors and fixed-wing where high-precision GNSS + compass + barometer needed for navigation and autonomous flight.
- Ideal for vehicles running ArduPilot firmware with CAN/DroneCAN peripheral integration.
- Suitable for FPV & professional drones requiring sensor fusion for attitude, heading & altitude estimates.
4. Integration Setup Notes
- Connect by CAN:
- M10-L4-3100 5 V → FC 4.5-5.3 V
- M10-L4-3100 CAN-H → FC CAN High
- M10-L4-3100 CAN-L → FC CAN Low :contentReference[oaicite:26]{index=26}
- For UART/MSP usage:
- M10-L4-3100 5 V → FC 4.0-5.3 V
- M10-L4-3100 TX2 → FC UART_RX
- M10-L4-3100 RX2 → FC UART_TX :contentReference[oaicite:27]{index=27}
- In ArduPilot, set parameters:
- GPS_TYPE → 9 (DroneCAN) :contentReference[oaicite:28]{index=28}
- SERIALx_PROTOCOL → 32 (MSP) if using UART mode :contentReference[oaicite:29]{index=29}
- Note: The device includes I2C port for optional external airspeed sensor; if used set ARSPD_TYPE→8, ARSPD_USE→1. :contentReference[oaicite:30]{index=30}
- Mount the patch antenna facing upward, and ensure good clearance and minimal interference for best GNSS performance.
Reviews
There are no reviews for this product.
There are no reviews for this product, be the first to leave your review.
Answers & questions
Add your question and we will answer as soon as possible.
No questions about this product, be the first and ask your question.